Page 1 of 1

RJ45 Lan Cables

Posted: Tue, 02 Jan 2007 10:04 pm
by Computer
Can anyone please dont mind to use your precious time to explain to me what is and what is the different of " CAT5 and CAT6 " Lan Cables ?
Thanks for your time ....

Posted: Tue, 02 Jan 2007 10:46 pm
by ksl
Cat 5 is just a standard patch cable, cat 5 E is enhanced 350 Mhz and cat 6 is a high performance multimedia cable, I believe!


Some Q & A on Cat 6
http://www.cat6.com/faqs/freqAskQues%20 ... ystem.aspx

RJ45 Lan Cables

Posted: Tue, 02 Jan 2007 11:07 pm
by Computer
Very thanks you .....

Posted: Wed, 03 Jan 2007 2:40 pm
by bigfilsing
cat being short for "category"

Posted: Wed, 03 Jan 2007 3:42 pm
by Jedi
CAT6 supports Gigabit (1000 Mbps) Ethernet, CAT5 does not. So if you have Gigabit ethernet cards, you will need CAT6 cable to obtain Gigabit bandwidth.

Posted: Sat, 06 Jan 2007 10:33 am
by preddy25
Jedi wrote:CAT6 supports Gigabit (1000 Mbps) Ethernet, CAT5 does not. So if you have Gigabit ethernet cards, you will need CAT6 cable to obtain Gigabit bandwidth.
beg to differ , cat5e can do the trick of going up to gigabit , cat6 is relatively new and hugely expansive still..

Posted: Sat, 06 Jan 2007 11:17 pm
by ksl
preddy25 wrote:
Jedi wrote:CAT6 supports Gigabit (1000 Mbps) Ethernet, CAT5 does not. So if you have Gigabit ethernet cards, you will need CAT6 cable to obtain Gigabit bandwidth.
beg to differ , cat5e can do the trick of going up to gigabit , cat6 is relatively new and hugely expansive still..
according to cat website on the link above, it is not cost effective to use 5E becuase it is apparently pushing the limits, that's why cat 6 was introduced, and will most certainly be the standard. So it does actually make sense to go for cat6 if the network is being built for the future, or upgraded, especially for commercial or residential purposes, don't you think?

Lan Cables

Posted: Thu, 11 Jan 2007 9:16 pm
by Computer
bigfilsing wrote:cat being short for "category"
Thanks you ...Messages noted ....

Lan Cables

Posted: Thu, 11 Jan 2007 9:19 pm
by Computer
Thanks you everbody ..for your best advise ....